MULTIPURPOSE EP 0
A premium quality semi-fluid grease designed for centralised lubrication systems. Suitable for anti-friction and plain bearings subjected to high load conditions. can also be used for gearboxes designed to operate with a semi-fluid slumping grease.
- Excellent extreme pressure and anti-wear performance.
- High degree of corrosion protection.
- Highly versatile semi-fluid grease for centralised lubrication.
-
operating temperature range of -40°C to +120°C
Performance level
- DIN 51825: KP1 P-30
- DIN 51825: KP2 P-30
- DIN 51825: KP3 P-30
Applications
Can be applied manually, or via a centralised lubricating system capable of pumping an NLGI No. 0 grease; consult a qualified centralised lubrication systems engineer before installation.
As with all greases used for the first time, check compatibility with the grease applied previously and if necessary purge bearings prior to application. Likewise, as a general rule, take care not to over-lubricate
and apply the quantity of grease recommended by the bearing manufacturer.
Characteristics
| Unit | Average Value | |
|---|---|---|
| Color | Brown | |
| NLGI classification | 0 | |
| Worked penetration | 355-385 | |
| Four Ball Weld Test | kgs | >280 |
| Copper corrosion | 1b | |
| Water stability | <60 | |
| Oil separation % | max 5 | |
| Four Ball Wear Test | < 0.6 | |
| Water washout wt% loss | 10max | |
| Rust prevention | pass | |
| Roll stability, mm-1 | -25 to +60 | |
| Dropping Point | °C | >180 |
Packaging
| 24x400g | 4x5kg | 18kg | 50kg | 180kg |